Log In To Oracle Ilom Using A Local Serial Connection; Log In To Oracle Ilom Using A Remote Ethernet Connection - Oracle sun X4-8 Installation Manual

"Log In to Oracle ILOM Using a Local Serial Connection" on page 55
■
"Log In to Oracle ILOM Using a Remote Ethernet Connection" on page 55
■

Log In to Oracle ILOM Using a Local Serial Connection

This procedure does not require that you know the IP address of the server SP. It does require
that you log in to an Oracle ILOM account with administrator privileges.
The default Oracle ILOM administrator account is root and its password is changeme.
Note -
If this default account has since been changed, contact your system administrator for an Oracle
ILOM user account with administrator privileges.
1. Verify that your serial console connection through the server's SER MGT port is
secure and operational.
2. Ensure that the following serial communication settings are configured:
8N1: eight data bits, no parity, one stop bit
■
9600 baud
■
Disable hardware flow control (CTS/RTS)
■
3. Press Enter to establish a connection between your serial console and Oracle
ILOM.
A login prompt to Oracle ILOM appears.
4. Log in to the Oracle ILOM command-line interface (CLI) using an administrator
account.
Oracle ILOM displays a default command prompt (->), indicating that you have successfully
logged in to Oracle ILOM.
Log In to Oracle ILOM Using a Remote Ethernet
Connection
This procedure requires that you log in to an Oracle ILOM account with administrator
privileges, and that you know the IP address or hostname of the server SP. Steps for logging in
using the command-line interface (CLI) or web interface are described below.
Log In to Oracle ILOM Using a Local Serial Connection
Connecting to Oracle ILOM 55