Configuring The Settings For Using Snmp - Konica Minolta bizhub C754 User Manual

14

Configuring the settings for using SNMP

Enable SNMP. Also specify whether to use the authentication setting or TRAP function of SNMP.
1
In the administrator mode, select [Network] - [SNMP Setting], then configure the following settings.
Settings
[SNMP]
[UDP Port Setting]
[SNMP v1/v2c Setting]
[Read Community
Name]
14-26
Description
To enable SNMP, select [ON] and select the check box of SNMP version
you use.
Select [SNMP v1(IPX)] when you use SNMP in an IPX environment.
If necessary, change the UDP port number.
Normally, you can use the original port number.
When you use SNMP v1/v2c, configure the settings relevant to SNMP
v1/v2c.
Enter a read-only community name (using up to 15 characters, excluding
spaces, \, ,' ,", and #).
Managing the machine via SNMP
bizhub C754/C654
14.6