[Tcp/Ip Settings]; [Ipv4 Settings] - Konica Minolta bizhub C754 User Manual

[TCP/IP Settings]

To display: [Utility] - [Administrator Settings] - [Network Settings] - [TCP/IP Settings]
Configure the settings to use this machine in a TCP/IP environment.
Settings
[ON]/[OFF]

[IPv4 Settings]

[IPv6 Settings]
[DNS Host]
[DNS Domain]
[DNS Server Settings
(IPv4)]
[DNS Server Settings
(IPv6)]
[IPsec Settings]
[IP Filtering (Permit Ac-
cess)]
[IP Filtering (Deny Access)]
[RAW Port Number]
[LLMNR Setting]
[IPv4 Settings]
To display: [Utility] - [Administrator Settings] - [Network Settings] - [TCP/IP Settings] - [IPv4 Settings]
Assign an IP address (IPv4) to this machine.
Settings
[IP Application Method]
[Manual Input]
[Auto Input]
bizhub C754/C654
Description
Select whether to use TCP/IP.
[ON] is specified by default.
Assign an IP address (IPv4) to this machine.
Assign an IP address (IPv6) to this machine.
When connecting to this machine using the host name on the DNS server
environment, register the host name of this machine.
Register the name of a domain this machine joins.
To resolve the name using the host name when accessing a computer or
server on the network from this machine, register your DNS server address
(IPv4) on this machine.
To resolve the name using the host name when accessing a computer or
server on the network from this machine, register your DNS server address
(IPv6) in this machine.
Configure settings to enable use of IPsec on this machine.
Specify an IP address of a computer to which you want to allow access to
this machine.
Specify an IP address of a computer to which you want to deny access to
this machine.
Specify a RAW port number required for Port9100 printing.
Select whether to use LLMNR (Link-local Multicast Name Resolution).
Description
Select the method to assign the IP address to this machine according to
your environment.
[Auto Input] is specified by default.
Assign the fixed IP address to this machine.
Enter the IP address, subnet mask, and default gateway.
Automatically assigns the IP address using DHCP or other protocols.
Pressing [Auto Input] allows you to select an Auto Input option.
• [DHCP Settings]: [ON] is specified by default.
• [BOOTP Settings]: [OFF] is specified by default.
• [ARP/PING Settings]: [ON] is specified by default.
• [AUTO IP Settings]: [ON] is specified by default.
17
17-5