Konica Minolta bizhub C754 User Manual page 307

13.6 Using IPsec communication
Settings
[IKE Setting]
[Authentication Meth-
od]
[ESP Encryption Algo-
rithm]
[ESP Authentication
Algorithm]
[AH Authentication Al-
gorithm]
[Perfect Forward Se-
crecy]
[Diffie-Hellman
Group(IKEv1)]/[Diffie-
Hellman
Group(IKEv2)]
[Manual Key Settings]
[Encryption Algorithm]
[Authentication Algo-
rithm]
[SA Index]
[Common Key En-
cryption ]
[Common Key Au-
thentication]
4
From [Peer] in [IPsec Setting], click [Create] and register peers of this machine.
% You can register up to 10 peers.
Settings
[Name]
[Set IP Address]
[Pre-Shared Key Text]
bizhub C754/C654
Description
Configure IKE settings used for this SA.
Select an authentication method.
[Security Protocol][ESP], configure the ESP encryption algorithm.
[Security Protocol][ESP], configure the ESP authentication algorithm.
[Security Protocol][AH], configure the AH authentication algorithm.
Select this check box if you wish to increase the IKE strength.
Selecting this check box increases the time spent for communication.
Select the Diffie-Hellman group.
When using a device that does not support automatic key exchange using
IKE, configure each parameter manually.
Select the algorithm to be used for encryption.
Select the algorithm to be used for authentication.
Specify the SA Security Parameter Index to be added to the IPsec header.
Specify the common key used for encryption.
You can specify different common keys respectively for send and receive.
Specify the common key used for authentication.
You can specify different common keys respectively for send and receive.
Description
Enter a peer name (using up to 10 characters).
Specify the IP address of the peer.
Enter the Pre-Shared Key text to be shared with the peer (using up to 128
characters).
Specify the same text as that for the peer.
13
13-19