[Time Adjustment Setting]; [Status Notification Setting] - Konica Minolta bizhub C754 User Manual

17

[Time Adjustment Setting]

To display: [Utility] - [Administrator Settings] - [Network Settings] - [Detail Settings] - [Time Adjustment Set-
ting]
Configure settings to automatically adjust the date and time of this machine using the NTP (Network Time
Protocol) server.
Settings
[ON]/[OFF]
[Auto IPv6 Retrieval]
[NTP Server Setting]
[Host Address]
[Port Number]
[Set Date]
[Auto Time Adjustment]
[Polling Interval]

[Status Notification Setting]

To display: [Utility] - [Administrator Settings] - [Network Settings] - [Detail Settings] - [Status Notification Set-
ting]
Configure the setting for notifying to the registered E-mail address when a warning such as for toner replace-
ment or a paper jam occurs on this machine.
Settings
[Register Notification Ad-
dress]
[IP Address 1] to [IP
Address 5]
17-32
Description
Select whether to automatically adjust the date and time of this machine
via the NTP server.
[OFF] is specified by default.
In the IPv6 environment, select whether to automatically specify the NTP
server address by DHCPv6.
[On] is specified by default.
Register a discovery proxy server to perform Web service printing or scan-
ning.
Select a number to be registered, and configure the following items.
Enter the NTP server address.
Use one of the following entry formats.
• Example of host name entry: "host.example.com"
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6b.:fe10:2f16"
If necessary, change the NTP server port number.
Normally, you can use the original port number.
[123] is specified by default.
Connect to the NTP server, and adjust the date and time of this machine.
Select whether to automatically adjust the date and time by connecting to
the NTP server at periodical intervals.
[Off] is specified by default.
If you select [On] for [Auto Time Adjustment], specify an interval to auto-
matically adjust the date and time.
[24 hours] is specified by default.
Description
Register an address where to notify a warning that occurred on this ma-
chine.
Select this item when specifying a notification destination with an IP ad-
dress or host name.
• [Address]: Enter the address of the destination in any of the following
formats.
Example of host name entry: "host.example.com"
Example of IP address (IPv4) entry: "192.168.1.1"
Example of IP address (IPv6) entry: "fe80::220:6b.:fe10:2f16"
• [Port Number]: If necessary, change the port number. [162] is specified
by default.
• [Community Name]: Enter the community name (using up to 15 charac-
ters). [public] is specified by default.
• [Notification Items]: Select an item to be notified automatically. Set an
item to be notified to [ON].
bizhub C754/C654