Configuring Default Compression Type Setting For Transmission In Black And White - Konica Minolta bizhub C754 User Manual

10
Settings
[Operating Mode]
[Sending Colored Docu-
ments]
Configuring default compression type setting for transmission in black and
white
If necessary, change the default compression type setting when sending a fax in black and white.
In the administrator mode, select [Fax Settings] - [Network Fax Setting] - [Black Compression Level], then
configure the following settings.
Settings
[Black Compression Level]
10-22
Configuring the IP address fax environment
Description
Select an operation mode of IP address fax according to your environment.
• [Mode 1]: This mode allows communication between Konica Minolta
models capable of transmitting IP address faxes, and between models
compatible with the Direct SMTP standard defined by CIAJ (Communi-
cations and Information Network Association of Japan). However, be-
cause a unique method developed by Konica Minolta is used to send a
color fax, only the Konica Minolta models can receive such a color fax.
• [Mode 2]: This mode allows communication between Konica Minolta
models capable of transmitting IP address faxes, and between models
compatible with the Direct SMTP standard defined by CIAJ (Communi-
cations and Information Network Association of Japan). The method
compatible with the Direct SMTP standard (Profile-C format) is used to
send a color fax.
[Mode 1] is specified by default.
Select whether or not to accept sending of color faxes when selecting
[Mode 2] for [Operating Mode].
To send a fax to a machine that does not support color reception based on
the Direct SMTP standard, select [Restrict].
[Allow] is specified by default.
Description
Select the default compression type for transmission in black and white
• [MH]: The data size is larger than [MMR].
• [MR]: The data size is intermediate between [MH] and [MMR].
• [MMR]: The data size is the smallest.
[MMR] is specified by default.
10.2
bizhub C754/C654