Konica Minolta bizhub C754 User Manual page 308

13
Settings
[Key-ID String]
5
From [Protocol Setting] in [IPsec Setting], click [Create] and specify the protocol used for IPsec com-
munication.
% Up to 10 protocols can be specified.
Settings
[Name]
[Protocol Identification
Setting]
[Port Number]
6
In the administrator mode, select [Network] - [TCP/IP Setting] - [IPsec] - [Enable IPsec], then click [OK].
13-20
Description
Enter the Key-ID to be specified for the Pre-Shared Key (using up to 128
characters).
Description
Enter the protocol name (using up to 10 characters).
Select a protocol used for IPsec communication.
If [TCP] or [UDP] has been selected in [Protocol Identification Setting],
specify the port number used for IPsec communication.
Using IPsec communication
bizhub C754/C654
13.6