Using The Proxy Server - Konica Minolta bizhub C754 User Manual

7

Using the proxy server

Configure settings for scanning through this machine in the environment where the multicast communication
is restricted using the discovery proxy defined by WS-Discovery. Configure the setting if your environment
requires the discovery proxy server.
In normal circumstances, to perform scan transmission through this machine using the Web service, the
computer must be connected at a location where multicast communication is available for this machine.
However, installing the discovery proxy server at a location where unicast communication is available for this
machine enables it to perform scan transmission.
In the administrator mode, select [Network] - [DPWS Settings] - [DPWS Extension Settings], then configure
the following settings.
Settings
[Enable Proxy]
[Proxy1] to [Proxy3]
[Proxy Server Ad-
dress]
[File Path]
[Enable SSL]
[Proxy Server Port
Number]
7-30
Description
Select [ON] to use the discovery proxy.
[OFF] is specified by default.
Register the discovery proxy server used on this machine.
Enter the discovery proxy server address.
Use one of the following formats.
• Example of host name entry: "host.example.com"
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
Enter the service name at the path of the URL where the WS-Discovery
service is published in the discovery proxy server (using up to 255 charac-
ters).
When using SSL to encrypt a communication with the discovery proxy
server, select [ON].
[OFF] is specified by default.
If necessary, change the port number of the discovery proxy server.
Normally, you can use the original port number.
[80] is specified by default.
Configuring the WS scan environment 7.5
bizhub C754/C654