Konica Minolta bizhub C754 User Manual page 106

7
Settings
[Max.Search Results]
[Authentication Method]
[Login Name]
[Password]
[Domain Name]
[Select Server Authentica-
tion Method]
[Use Referral]
[Search Condition At-
tributes]
[Search]
[Initial Setting for Search
Details]
[Search Attributes Authen-
tication]
Tips
- Clicking [Check Connection] at [LDAP Server List] enables you to confirm whether you can connect to
the LDAP server according to the registered contents.
7-36
Searching for a destination using the LDAP server
Description
Change the maximum number of destinations to be displayed as search
results, if necessary.
[100] is specified by default.
Select the authentication method to log in to the LDAP server.
Select one appropriate for the authentication method used for your LDAP
server.
• [anonymous]: [Login Name], [Password], and [Domain Name] can be
omitted.
• [GSS-SPNEGO]: Log in to the server using the Kerberos authentication
method. Select this to use the Active Directory.
[anonymous] is specified by default.
Log in to the LDAP server, and enter the login name to search for a desti-
nation (using up to 64 characters).
Enter the password of the user name you entered into [Login Name] (using
up to 64 characters, excluding ").
To enter (change) the password, select the [Password is changed.] check
box, then enter a new password.
Enter the domain name to log in to the LDAP server (using up to 64 char-
acters).
If [GSS-SPNEGO] is selected for [General Settings], enter the domain
name of Active Directory.
Select the LDAP server authentication method.
• [Set Value]: Use the settings of [Login Name], [Password], and [Domain
Name].
• [User Authentication]: Synchronizes with the user authentication of this
machine. Uses the user name and password of the registered user of
this machine as [Login Name] and [Password].
• [Dynamic Authentication]: The system prompts you to enter the user
name and password at LDAP searching.
[Set Value] is specified by default.
Select whether to use the referral function, if necessary.
Make an appropriate choice to fit the LDAP server environment.
[ON] is specified by default.
Select attributes to be specified when performing the LDAP search.
The setting can be switched between [Name] (cn) and [Nickname] (display-
Name).
[Name] is specified by default.
Select [ON] to display candidate destinations when entering a part of the
name to search for a destination via the LDAP server.
[OFF] is specified by default.
Specify LDAP search conditions.
Select this check box to enable the attribute-based authentication when
[Authentication Method] is set to [Simple] and [Select Server Authentica-
tion Method] to [Dynamic Authentication].
If this check box is selected, the user does not need to enter all of the DN
(Distinguished Name) when performing authentication via the LDAP server.
At [Search Attribute], enter the search attribute to be automatically added
before the user name. In normal circumstances, specify "uid" before the
user name, however, depending on your environment, you need to specify
other attribute such as "cn".
[uid] is specified by default.
7.7
bizhub C754/C654