Authentication Unit (Biometric Type); Authenticating In The Ldap Server Using The Authentication Card; Overview - Konica Minolta bizhub C754 User Manual

12

Authentication Unit (biometric type)

If you use the optional Authentication Unit (biometric type), you can log in to this machine or execute a
print job using the bio authentication function.
In the administrator mode, select [User Auth/Account Track] - [Authentication Device Settings], then set the
operation of the bio authentication unit and how to log in to this machine.
Settings
[Beep Sound]
[Operation Settings]
12.19.2 Authenticating in the LDAP server using the authentication card (LDAP-IC
Card Authentication)

Overview

You can configure settings so that authentication is performed in the LDAP server using the card ID registered
in the authentication card (LDAP-IC Card Authentication).
Authentication is completed only by placing the IC card. This enhances security without damaging users'
ability to easily operate the machine.
To perform authentication using the authentication card, follow the below procedure to configure the set-
tings.
1
Enable the use of Authentication Unit (IC card type) in this machine
% Authentication Unit (IC card type) must be configured by your service representative. For details,
contact your service representative.
2
Configure basic settings for the LDAP-IC card authentication
3
Set the following options according to your environment
Purpose
Communicate with the LDAP server using SSL
12-68
Description
Select whether to give a "blip" sound when the finger vein pattern is
scanned successfully.
[ON] is specified by default.
Select how to log in to this machine.
• [1-to-many authentication]: Simply place his or her finger to log in.
• [1-to-1 authentication]: Enter the user name and place his or her finger
to log in. Bio information is used instead of the password.
[1-to-many authentication] is specified by default.
Using the authentication unit
Reference
page 12-71
bizhub C754/C654
12.19