13
Using the certificate registered upon shipment
Select a login mode to enable SSL communication. Also select the SSL encryption strength.
In the administrator mode, select [Security] - [PKI Settings] - [SSL Setting], then configure the following set-
tings.
Settings
[Mode using SSL/TLS]
[Encryption Strength]
13-4
Creating a certificate for this machine to communicate via SSL
Description
Select a mode to perform SSL communication.
•
[Admin. Mode]: Uses SSL communication in the administrator mode
only.
•
[Admin. Mode and User Mode]: Uses SSL communication in both the
administrator mode and user mode.
•
[None]: Does not use SSL communication.
[None] is specified by default.
Select the SSL encryption strength.
Select it according to your environment.
[AES-256, 3DES-168, RC4-128, DES-56, RC4-40] is specified by default.
13.1
bizhub C754/C654