Using The Ieee802.1X Authentication - Konica Minolta bizhub C754 User Manual

13.7

Using the IEEE802.1X authentication

13.7 Using the IEEE802.1X authentication
If IEEE802.1X authentication is installed in your environment, configure the following settings.
Using IEEE802.1X authentication enables you to only connect devices authorized by administrators to the
LAN environment. Devices that are not authenticated will not be allowed to even join the network, and this
ensures rigid security.
In the administrator mode, select [Network] - [IEEE802.1X Authentication Setting] - [IEEE802.1X Authentica-
tion Setting], then configure the following settings.
Settings
[IEEE802.1X Authentica-
tion Setting]
[Supplicant Setting]
[User ID]
[Password]
[EAP-Type]
bizhub C754/C654
Description
Select [ON] to use IEEE802.1X authentication.
[OFF] is specified by default.
In IEEE802.1x authentication, this machine acts as a supplicant (client to
be authenticated).
Configure the settings required for authentication by the authentication
server.
Enter a user ID (using up to 128 characters).
This user ID is used for all EAP-Type options.
Enter a password with 128 characters.
The password is used for all EAP-Type options other than [EAP-TLS].
To enter (change) the password, select the [Password is changed.] check
box, then enter a new password.
Select an EAP authentication method.
• [Depend on Server]: The EAP-Type provided by the authentication
server will be used for authentication. Configure the supplicant settings
as required for this machine according to the EAP-Type provided by
the authentication server.
• Do not select [OFF].
[OFF] is specified by default.
13
13-23