Adding A Font/Macro - Konica Minolta bizhub C754 User Manual

15.8

Adding a font/macro

15.8 Adding a font/macro
Add a font or macro to this machine. Also delete the registered font or macro.
In the administrator mode, select [Maintenance] - [Edit Font/Macro] - [New Registration], then configure the
following settings.
Settings
[Type]
[ID]
[Location]
bizhub C754/C654
Description
Select a type of font or macro to be registered.
Enter the ID of the font/macro.
This item cannot be configured if a PS font or PS macro is selected.
If you enter an ID that has already been used, the existing ID will be over-
written by it.
Select the storage location of the font/macro.
15
15-35