Configuring The Appletalk Settings - Konica Minolta bizhub press C7000 User Manual

6.1 Mac OS X 10.4/10.5/10.6
% When OS X 10.4 is used, select [KONICA MINOLTA] from the [Print Using:], and then select the
printer driver of the desired model name from the list.
7
Click [Add].
When the selected printer is registered in the [Print & Fax], the setting procedure is completed.
Reference
- For OS X 10.4, you can also add a printer by clicking [Add] in the [Printer Setup Utility] window.

Configuring the AppleTalk settings

Configuring the [AppleTalk Settings] for the machine
Enable AppleTalk in [AppleTalk Settings], and then enter the printer name.
Important
- Mac OS X 10.6 does not support AppleTalk.
d
Reference
For details on [AppleTalk setting] for this machine, refer to [User's Guide - POD Administrator's Reference].
Configuring [AppleTalk Setting] for the computer
Configure the AppleTalk settings for the Macintosh computer connected to the printer.
1
In the [Apple Menu], select [System Preferences...].
2
Click the [Network] icon.
3
The Ethernet setting window appears.
% For OS X 10.5, select [Ethernet], and then click [Advanced...].
% For OS X 10.4, select [Built-in Ethernet], and then click [Configure...].
4
Double-click the [AppleTalk] tab to enable AppleTalk.
5
Click the close button at the top left corner of the window.
% When the [This service has unsaved changes] message appears, click [Apply].
bizhub PRESS C7000/C7000P/C6000/C70hc
6
6-4