6.5
Configuring flash view settings
6.5
Configuring flash view settings
6.5.1
Configuring settings for display in flash view
To display Web Connection in the flash view, enable the TCP Socket (ASCII Mode) of this machine.
In the administrator mode, select [Network] - [TCP Socket Setting], then configure the following settings.
Settings
[TCP Socket(ASCII Mode)]
[Port No.(ASCII Mode)]
d
Reference
For details on how to enable the flash view, refer to page 3-6.
bizhub C754/C654
Description
Select this check box to use TCP Socket (ASCII Mode).
[ON] (selected) is specified by default.
If necessary, change the port number of TCP Socket (ASCII Mode).
Normally, you can use the original port number.
[59160] is specified by default.
6
6-7