Konica Minolta bizhub C754 User Manual page 189

10.1 Configuring the Internet fax environment
2
Set the POP over SSL and APOP settings according to your environment. In the administrator mode,
select [Network] - [E-mail Setting] - [E-mail RX (POP)], and configure the following settings.
Settings
[APOP Authentication]
[Use SSL/TLS]
[Port No.(SSL)]
[Certificate Verification
Level Settings]
[Validity Period]
[CN]
[Key Usage]
[Chain]
[Expiration Date Con-
firmation]
d
Reference
In the administrator mode, select [Security] - [Certificate Verification Settings], then configure whether to ver-
ify the certificate. The certificate is verified by default. For details, refer to page 13-11.
bizhub C754/C654
Description
If you use APOP in your E-mail server (POP), select [ON].
[OFF] is specified by default.
When using SSL to encrypt a communication with the E-mail server (POP),
select this check box.
[OFF] (not selected) is specified by default.
If necessary, change the SSL communication port number.
Normally, you can use the original port number.
[995] is specified by default.
To verify the certificate, select items to be verified.
If you select [Confirm] at each item, the certificate is verified for each item.
Confirm whether the certificate is still valid.
[Confirm] is specified by default.
Confirm whether CN (Common Name) of the certificate matches the server
address.
[Do Not Confirm] is specified by default.
Confirm whether the certificate is used according to the intended purpose
approved by the certificate issuer.
[Do Not Confirm] is specified by default.
Confirm whether there is a problem in the certificate chain (certificate path).
The chain is validated by referencing the external certificates managed on
this machine.
[Do Not Confirm] is specified by default.
Confirm whether the certificate has expired.
Confirm for expiration of the certificate in the following order.
• OCSP (Online Certificate Status Protocol) service
• CRL (Certificate Revocation List)
[Do Not Confirm] is specified by default.
10
10-17