Constructing A Single Sign-On Environment For The Smb Transmission - Konica Minolta bizhub C754 User Manual

12.10

Constructing a single sign-on environment for the SMB transmission

12.10 Constructing a single sign-on environment for the SMB transmis-
sion
By using the user authentication information (login name and password) of this machine as SMB destination
authentication information (host name and password), you can avoid the problem of having to specify SMB
destination authentication information, allowing construction of a single sign-on environment for SMB trans-
mission.
In the administrator mode, select [Network] - [SMB Setting] - [Client Setting], then configure the following set-
tings.
Settings
[Default Domain Name]
[SMB User Credential Set-
ting]
[Edit SMB User Creden-
tials]
bizhub C754/C654
Description
Enter the default domain name to be added to the host name of the desti-
nation at SMB transmission (using up to 64 characters). The default do-
main name cannot be prefixed by an asterisk (*).
If the domain name of the destination is not specified by the user when
sending data using SMB, the domain name specified here is added.
This item is not required when Active Directory is used as an authentication
server.
When using the user authentication information (login name and password)
of this machine as SMB destination authentication information (host name
and password), select [ON].
If Active Directory is used as an authentication server, the domain name of
Active Directory is added to the login name. When other authentication
method is used, the domain name entered at [Default Domain Name] is
added.
[OFF] is specified by default.
If you have selected [ON] at [SMB User Credential Setting], select whether
to allow registration of the SMB destination including authentication infor-
mation same as that for user authentication.
When you want to allow only users whose authentication information for
user authentication matches that for SMB destination to access the SMB
destination, select [Restrict].
[Restrict] is specified by default.
12
12-41