Using Ssl Communication - Konica Minolta bizhub C754 User Manual
Hide thumbs
Also See for bizhub C754:
- User manual (427 pages) ,
- Quick start manual (130 pages) ,
- Shortcut manual (33 pages)
Table of Contents
Advertisement
8
Using SSL communication
Communication between this machine and the computer is encrypted with SSL.
To encrypt SSL communication between this machine and the computer, you must set the bidirectional SSL
communication between them. Before starting this procedure, confirm the following.
-
Name resolution must have been performed in the DNS server.
-
If the certificate of this machine is not the one issued by the Certificate Authority (CA), you must register
the certificate of this machine in [Trusted Root Certification Authorities] of the computer.
-
Create a certificate in the computer side in advance, and associate it with the TCP/IP communication
port (default port number: 5358).
Enable the SSL communication. In addition, specify how to verify the certificate.
In the administrator mode, select [Network] - [DPWS Settings] - [DPWS Common Settings], then configure
the following settings.
Settings
[SSL Setting]
[Certificate Verification
Level Settings]
[Validity Period]
[Key Usage]
[Chain]
[Expiration Date Con-
firmation]
d
Reference
In the administrator mode, select [Security] - [Certificate Verification Settings], then configure whether to ver-
ify the certificate. The certificate is verified by default. For details, refer to page 13-11.
8-18
Configuring the WS printing environment
Description
Select [ON] to make SSL communications.
[OFF] is specified by default.
To verify the certificate, select items to be verified.
If you select [Confirm] at each item, the certificate is verified for each item.
Confirm whether the certificate is still valid.
[Confirm] is specified by default.
Confirm whether the certificate is used according to the intended purpose
approved by the certificate issuer.
[Do Not Confirm] is specified by default.
Confirm whether there is a problem in the certificate chain (certificate path).
The chain is validated by referencing the external certificates managed on
this machine.
[Do Not Confirm] is specified by default.
Confirm whether the certificate has expired.
Confirm for expiration of the certificate in the following order.
•
OCSP (Online Certificate Status Protocol) service
•
CRL (Certificate Revocation List)
[Do Not Confirm] is specified by default.
8.5
bizhub C754/C654
Advertisement
Table of Contents
