Konica Minolta bizhub C754 User Manual page 322

14
Settings
[Power Save Settings]
[Power Key Setting]
[Enter Power Save Mode]
[Power Saving Fax/Scan]
[Awake from Power Save
Mode by Touching Control
Panel]
d
Reference
For details on the Power key and Power Save functions, refer to [User's Guide: Control Panel].
14-4
Managing the machine power for power saving
Description
If [Power Save] is selected for [Power Key Setting], select the type of the
Power Save mode you want to switch when pressing the Power key on the
Control Panel.
• [Low Power]: Switches to the Low Power mode. Turns off the display
of the Touch Panel to reduce power use.
• [Sleep]: Switches to the Sleep mode. Sleep mode provides a greater
power saving effect than the Low Power mode. However, the time re-
quired to return to the normal mode is longer than the time required to
recover from the Low Power mode.
[Low Power] is specified by default.
Select whether to use the Power key on the Control Panel as a sub power
off key or power save key.
• [Sub Power OFF]: Press the Power key to turn the sub power off. If the
Power key is held down, the power save mode shifts to the ErP Auto
Power Off mode (close to main power off mode), which offers a higher
power saving effect than sub power off mode.
• [Power Save]: Press the Power key to shift to the Power Save mode
(Low Power or Sleep mode). Hold down the Power key to shift to sub
power off mode.
[Sub Power OFF] is specified by default.
When this machine receives a print job from a fax machine or computer in
the Power Save mode, select the timing to switch to the Power Save mode
after the print job has ended.
• [Normal]: Switches to the Power Save mode based on the time speci-
fied in [Low Power Mode Setting] or [Sleep Mode Settings].
• [Immediately]: Switches to the Power Save mode immediately after a
print job has ended.
[Immediately] is specified by default.
Select whether to give priority to the power saving when returning from the
Sleep or sub power off mode to a mode other than the copy mode.
When returning to a mode without printing such as the scan/fax mode, do
not adjust the temperature of the Fusing Unit in this machine, reducing the
power consumption.
You can set this option when you have selected an option other than
[Copy] in [Priority Mode] that is selected by [Administrator Settings] - [Sys-
tem Settings] - [Reset Settings] - [System Auto Reset] on the Control Pan-
el.
• [Power Save]: The temperature of Fusing Unit is not adjusted when the
machine returns to the normal mode.
• [Standard]: The temperature of Fusing Unit is adjusted when the ma-
chine returns to the normal mode.
[Standard] is specified by default.
Select whether to return to the normal mode when you press the Touch
Panel in the Power Save mode.
If you select [OFF], the machine returns to the normal mode only using the
Power key.
[ON] is specified by default.
14.1
bizhub C754/C654