Registering A Group Program - Konica Minolta bizhub C754 User Manual

15.3 Registering a program
15.3.9

Registering a group program

A program can be registered or edited using Web Connection. Although character input is a difficult process
using the Touch Panel, it can be carried out easily if you use the computer.
A combination of address information and the fax/scan transmission option settings can be registered in a
program.
The following describes the group program.
In the administrator mode, select [Store Address] - [Program] - [Registration] - [Group], then click [OK] to con-
figure the following settings.
Settings
[Name]
[Destination Information]
[Basic Setting]/[Application
Setting]
[Limiting Access to Desti-
nations]
bizhub C754/C654
Description
Enter the program name (using up to 24 characters).
Assign a name that helps you easily identify the program.
Click [Search from List], and select a destination group from the list. Click
[Check Destination] to check registered address books.
Configure the fax/scan transmission option settings.
For details, refer to page 15-27.
Limit access to this destination, if necessary.
For details, refer to page 12-46.
15
15-25