Specifying The Settings; Specifying Settings Concerning The Snmp Protocol (Mode 390); Factory Settings; Specifying Settings Concerning Assistant Tool For C200 (Mode 470) - Konica Minolta bizhub c200 User Manual

Specifying machine functions (software switch settings)
2.4.17

Specifying settings concerning the SNMP protocol (mode 390)

Specify the security level for the SNMP protocol.

Factory settings

Bits
Settings

Specifying the settings

During the production of this unit, the settings in the shaded cells were selected.
Bits Description
7-6 Specify the security level for read user authentication.
5-4 Specify the security level for write user authentication.
3-0 -
2.4.18

Specifying settings concerning Assistant tool for C200 (mode 470)

Specify the file format for exporting registered one-touch information and the automatic logoff time for
Assistant tool for C200.
Factory settings
Bits
Settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
Bits Description
7 File format for exporting
6-4 -
3-1 Specify the automatic logoff time for Assistant tool for C200.
0 -
C200
7654 3210
1010 0100 (HEX: A4)
7654 3210
0000 0100 (HEX: 00)
Settings Details
00 No authentication
01 auth-password
10 auth-password/priv-pass-
word
11 * Do not specify these set-
tings.
00 No authentication
01 auth-password
10 auth-password/priv-pass-
word
11 * Do not specify these set-
tings.
0000 * Do not change the settings
for these bits.
Settings Details
0 TXT format
1 CSV format
000 * Do not change the settings
for these bits.
000 5 minutes
001 10 minutes
010 20 minutes
011 40 minutes
100 60 minutes
Others * Do not specify any settings
other than those mentioned
above.
0 * Do not change the setting
for this bit.
2
2-19