Setting Up A Printer - GE Panametrics GF868 Programming Manual

Setting Up a Printer

Printing Data
Use the PRNTR submenu to specify the type of printer connected to
the Model GF868. To set up a printer, refer to Figure A-5 on page
A-5 of Appendix A, Menu Maps, and complete the following steps:
IMPORTANT: A printer must be properly set up before proceeding
to any of the other sections in this chapter
1. To access the Print Menu, press the
Note: The Print Menu is not protected by the security feature and a
password is never required to access this menu.
2. Press the [←] or [→] key to display the option bar shown, and
then press to select the
[F1]
3. Use the [←], [→] and
Type. See Table 4-3 below for a complete list of the available
options.
Note: For compatibility with the Model GF868, the printer must
have an RS232 serial interface. To use a printer with a
parallel interface, a serial-to-parallel adapter must be used.
Table 4-3: Available Printer Options
Key(s) Printer Type
DP411
[F1]
[F2]
XTECH
[F3] EPSON
[F4] KODAK
[→] +[F1] SP401
After the desired printer type has been selected, the meter returns to
the standard data display screen and normal measurement taking.
[PRNT] key.
submenu.
PRNTR
[F1]-[F4] keys to select the desired Printer
Description
Seiko Model DPU-411 Type II
Extech Mini Serial Printer 42
Epson or Epson-compatible
Kodak Diconix 150 Plus
Syntest SP-401
March 2003
4-9