Stop Printing - GE Panametrics GF868 Programming Manual

March 2003

Stop Printing

4-8
Use the STOP submenu to terminate the printing of live, logged or
site data. To stop any active printing activity, refer to Figure A-5 on
page A-5 of Appendix A, Menu Maps, and complete the following
steps:
IMPORTANT: Make sure that a printer has been properly set up
before proceeding with this section.
1. To access the Print Menu, press the
Note: The Print Menu is not protected by the security feature and a
password is never required to access this menu.
2. Press = .
[F4] STOP
to continue printing or press [F2] to Stop the currently
3. Press [F1]
active printing job.
Note: After the STOP command has been issued, the printer will
complete the printing of any data already in the printer buffer.
Either wait for the printer to finish or turn the printer off to
empty the buffer immediately.
The Model GF868 returns to the standard data display screen and
normal measurement taking.
key.
[PRNT]
Printing Data