The Log Submenu; Entering The Log Submenu - GE Panametrics GF868 Programming Manual

The LOG Submenu

Entering the LOG
Submenu
Displaying Data
The LOG submenu permits the display of the data in a log file either
graphically or numerically. Although the Model GF868 can display
all of the data in a log file, screen size limitations prevent the
simultaneous display of the complete log file. Therefore, the function
keys must be used to view the remaining data. Follow the instructions
in this section to display a log file in the desired format.
Press the appropriate side of the
pane of the display screen, and complete the following steps:
1. To access the Display Menu, press the
2. Press [F4] = LOG .
3. Use the [←], [→] and
display. At the NAME
of all log files that are currently stored in memory. If there are no
log files currently stored in memory, the following prompt will
appear instead:
DISPLAY FEATURES
DISPLAY FORMAT
logging
All Logs Cleared!
hit key
If the prompt appears, at least one log file must be
All Logs Cleared!
created and stored in memory before the Display Log function can be
accessed. See Chapter 3, Logging Data, for instructions on creating a
log file. After at least one log file is stored in memory and selected at
the prompt of the
NAME
4. At the Format prompt, press
numeric format or press
graphical format.
•
If you pressed go to the next page
[F1],
•
If you pressed [F2], go to page 2-9.
key to activate the desired
[SCREEN]
key.
[DISP]
keys to select the desired log file to
[F1]-[F4]
prompt, the option bar will show the names
There are no log files currently
stored in memory. Either all of
the log files have been cleared or
no log files have yet been
created. Press any key to return
to measurement mode.
submenu, proceed to the next step.
LOG
[F1] to display the selected log in
to display the selected log in
[F2]
.
March 2003
2-7