What's Next - GE Panametrics GF868 Programming Manual

What's Next?

Programming Site Data
After completing the above steps, the meter returns to the User
Program. Continue as follows:
•
To continue programming the meter, refer to the menu maps in
Appendix A and navigate to the desired menu. Then, proceed to
the appropriate section of this manual for instructions.
•
To leave the User Program and retain the previous settings,
press [EXIT] and then press
programming changes will be discarded and you will be
returned to the data display.
•
To leave the User Program and return to measurement mode,
press and then press
[EXIT]
Your programming changes will be entered into the meter's
memory, and you will be returned to the data display.
March 2003
[F1] = NO at the SAVE prompt. Any
at the SAVE prompt.
[F2] = YES
1-31