Print Live Data; Numeric Format - GE Panametrics GF868 Programming Manual

March 2003

Print Live Data

Numeric Format

4-2
Use the DATA submenu to print live measurement data, as it is
collected. The data may be printed in either numeric or graphical
format, with a user specified time increment.
IMPORTANT: Make sure that a printer has been properly set up
before proceeding with this section.
To print live measurement data, refer to Figure A-5 on page A-5 of
Appendix A, Menu Maps, and complete the following steps:
1. To access the Print Menu, press the
Note: The Print Menu is not protected by the security feature and a
password is never required to access this menu.
2. Press [F1] to select the
3. Press = NUM to print the data in numeric format or press
[F1]
= PLOT to print the data in graphical format.
•
If you press [F1] , go to step 4.
•
If you press , go to step 8.
[F2]
4. Use the [←], [→] and
be printed. See Table 4-1 below for a list of the available options.
Table 4-1: Measurement Parameter Options
Option Bar Choice
[F1] = VEL
=
[F2] VOLUM
=
[F3] +TOTL
[F4] = -TOTL
→]
[ + [F1] = MDOT
→]
=
[ + [F2] +MASS
→]
=
[ + [F3] -MASS
→]
[ + [F4] = DIAG
Refer to Chapter 3, Diagnostics, of the Service Manual for a
discussion of the many parameters accessible via the
Note: The units assigned to the parameters in Table 4-1 above are
those selected in the User Program (
[PRNT] key.
DATA option.
keys to select the first parameter to
[F1]-[F4]
Description
Flow Velocity
Volumetric Flow
Forward Totalized Volume Flow
Reverse Totalized Volume Flow
Mass Flow
Forward Totalized Mass Flow
Reverse Totalized Mass Flow
Diagnostic
SYSTM
[F2]
option.
DIAG
submenu).
Printing Data