The Dual Submenu - GE Panametrics GF868 Programming Manual

The DUAL Submenu

Displaying Data
The DUAL format displays two measurements simultaneously in
normal print. To select the
display in this format, follow the instructions in this section.
Upon power up, a standard measurement mode display (similar to the
one shown below) appears in
of the key to activate the desired pane of the display
[SCREEN]
screen, and complete the following steps:
1. To access the Display Menu, press the
2. Press [F2] = DUAL . The measurement mode display reappears and
the display is now in the
←] and [→] keys to select the desired display
3. Use the [F1]-[F4], [
parameter option. See Table 2-1 on the previous page for a
complete description of the available options.
Note: See Chapter 3, Operation, of the Startup Guide for more
details on selecting a measurement parameter to display.
With the DUAL format display screen active, when a measurement
parameter is selected, the top line of the prompt area will be changed
to show that parameter. The parameter previously displayed at the top
of the display is moved to the bottom of the display, and the previous
bottom parameter is no longer shown.
format and the measurements to
DUAL
format. Press the appropriate side
BIG
key.
[DISP]
format.
DUAL
March 2003
2-3