GE Panametrics GF868 Programming Manual page 55

March 2003
Using the GRAPH
Format (cont.)
2-6
Table 2-2: Graph Display Options
Option Bar Choice
=
[F1] <CURS
[F2] = CURS>
=
[F3] START
[F4] = END
→]
=
[ + [F1] YMAX
→]
[ + [F2] = T INC
→]
=
[ + [F3] EXIT
Description
Moves the cursor to the left and displays
the corresponding measurement value and
time in the status line:
(i.e. )
6.85 Ft/s 10:38
Moves the cursor to the right and displays
the corresponding measurement value and
time in the status line:
(i.e. 5.31 Ft/s 10:38 )
Moves the cursor all the way to the left
side of the graph and posts the starting date
and time in the message line:
(i.e.
ST: 08 MAR 10:38
Moves the cursor all the way to the right
side of the graph and posts the ending date
and time in the message line:
(i.e. END 08 MAR 11:14
Displays the programmed maximum Y
value in the message line:
(i.e. )
YMAX 25.0 Ft/s
Displays the programmed time increment
value in the message line:
(i.e. T INC 30 seconds
Leaves the format and returns the
GRAPH
display to the previous data format. (The
key on the keypad will also perform
[EXIT]
this function.)
)
)
)
Displaying Data