The Big Submenu - GE Panametrics GF868 Programming Manual

March 2003

The BIG Submenu

2-2
The BIG format, which is the Model GF868's default power up
format, displays one measurement in large print. To select the
format and the measurement to display in this format, follow the
instructions in this section.
Upon power up, a standard measurement mode display (similar to the
one shown below) appears. Press the appropriate side of the
key to activate the desired pane of the display screen, and
[SCREEN]
complete the following steps:
site label site file
Velocity Ft/s
6.95
(error codes appear here)
VEL VOLUM +TOTL
DISPLAY FEATURES
DISPLAY FORMAT
previous selection appears here
BIG DUAL GRAPH
site label site file
Velocity Ft/s
6.95
(error codes appear here)
VEL VOLUM +TOTL
Table 2-1: Measurement Parameter Options
Option Bar Choice
= VEL
[F1]
= VOLUM
[F2]
[F3] = +TOTL
= -TOTL
[F4]
→]
= TIME
[ + [F1]
→]
[ + [F2] = MDOT
→]
= +MASS
[ + [F3]
→]
= -MASS
[ + [F4]
→] →]
[ + [ + [F1] = DIAG
Note: See Chapter 3, Operation, of the Startup Guide for more
details on selecting a measurement parameter to display.
The default power up screen is
already in
BIG
different display mode is active,
access the Display Menu by
pressing the
[DISP]
-TOTL
Press to select the
[F1]
option. The measurement mode
screen reappears with the display
in the format.
BIG
LOG
Use the [F1]-[F4], [
keys to select the desired display
parameter option. See Table 2-1
below for a complete description
of the available options.
-TOTL
Description
Flow Velocity
Volumetric Flow
Forward Totalized Volume Flow
Reverse Totalized Volume Flow
Total Flow Measurement Time
Mass Flow
Forward Totalized Mass Flow
Reverse Totalized Mass Flow
Diagnostic
BIG
mode. If a
key.
BIG
←] and [→]
Displaying Data