March 2003
Setting the Clock
Setting the Date
Setting the Time
1-30
Use the
CLOCK
submenu to enter the current date and time. Refer to
Figure A-3 on page A-3.
1. To program the
CLOCK
User Program.
2. The first prompt displays the programmed Date.
•
If the displayed date is correct, press
step 2.
•
If the displayed date is incorrect, press
the date, and complete the steps below.
a. Enter the current year and press
0 to 99.
b. Use the [←], [→] and
month.
c. Enter the current day and press
to the number of days in the current month.
3. The next prompt displays the programmed Time.
•
If the displayed time is correct, press
GLOBL prompt.
•
If the displayed time is incorrect, press
the date, and complete the steps below.
= AM or
a. Press
[F1]
press
. The allowable range is 1 to 12.
[ENT]
Note: A time of 12 PM represents Noon and a time of 12 AM
represents Midnight.
b. Enter the current Minutes and press
is 0 to 59.
c. Enter the current Seconds and press
range is 0 to 59.
submenu, press [→] and
= OK and proceed to
[F1]
= EDIT to change
[F2]
. The allowable range is
[ENT]
keys to select the current
[F1]-[F4]
. The allowable range is 1
[ENT]
= OK to return to the
[F1]
= EDIT to change
[F2]
[F2]
=
PM
. Then enter the current Hour and
. The allowable range
[ENT]
. The allowable
[ENT]
Programming Site Data
[F2]
at the initial