Numeric Format - GE Panametrics GF868 Programming Manual

March 2003

Numeric Format

2-8
The Model GF868 can log up to three parameters simultaneously.
Each set of data values is called a record, and up to 120 consecutive
records can be stored in a page. A log file can consist of up to 120
pages. The numeric log display, which shows one record at a time,
includes the following components:
•
page number
•
record number
•
time and date of creation
•
measurement value set
•
error messages (if any)
Upon choosing NUM at the
selected log file is displayed in a screen similar to the following:
PAGE# 1 REC# 80
09 MAR 98
11.66 Ft/s
1.32 KACF/MI
6.91 KACF
E5: Amplitude
<CURS CURS> <PAGE PAGE>
In the numeric display screen, the locator bar (except for the inverse
video pointer at the far right) is replaced by a standard video display
of the page number and record number. The first line of the prompt
area shows the time and date that the record was created, and the next
three lines list the values for the three logged parameters. Finally, any
error condition that existed at the time the record was taken is
indicated by an error code in the bottom line of the prompt area.
Table 2-3: Numeric Log Display Options
Option Bar Choice
[F1] = <CURS
=
[F2] CURS>
=
[F3] <PAGE
[F4] = PAGE>
→]
=
[ + [F1] START
→]
=
[ + [F2] END
→]
[ + [F3] = EXIT
FORMAT prompt, the first record of the
Use the [←], [→] and
keys to view additional records
or to exit the log display. The
options are listed in Table 2-3
below.
Description
display the previous record on the current
page
display the next record on the current page
display the previous page
display the next page
display the first record on the current page
display the last record on the current age
Leave the numeric LOG
to the previous data format. (The
key on the keypad will also perform this
function.)
[F1]-[F4]
display and return
[EXIT]
Displaying Data