Handling Site Files
Saving an Existing Site
to the Meter
Programming with PanaView
To access site files, click on the Site Files button in the Properties
window. The Site File Operations window (shown in Figure C-13
below) opens.
Figure C-13: The Site File Operations Window
To save an existing site to the meter:
1. Select the radio button for Selected and highlight an existing site
in the left pane.
2. Then click on the Save Site to Meter button. A screen opens
similar to Figure C-14 below.
Figure C-14: Site File Selection
3. Highlight the desired site and click Open. PanaView sends the site
to the meter.
April 2004
C-11