Activating Sleep Mode - GE Panametrics GF868 Programming Manual

Activating Sleep Mode

Displaying Data
During times when the display is not in use, use the
to temporarily suspend LCD display activity, which allows the Model
GF868 to process data more quickly. Press the appropriate side of the
[SCREEN] key to activate the desired pane of the display screen, then
proceed as follows:
Note: For this discussion, it is assumed that the left pane of the
display screen is active. If the right pane is active, replace the
keys designations by the
[F1]-[F4]
1. To access the Display Menu, press the
2. Press [→] and =
[F3]
appears.
Press any key . . ."
3. To reactivate the display and return to the previous data screen,
press any key on the keypad. The Model GF868 will automatically
return to the previous data display screen.
Note: With
as the selected display format, exiting
BIG
may not erase the sleep mode message and the data screen
will be superimposed on the message. If this occurs, simply
enter the DISP menu and reselect the
the screen. See the instructions earlier in this chapter.
[F5]-[F8]
[DISP]
. The message "
SLEEP
LCD SLEEP MODE -
BIG
March 2003
SLEEP submenu
keys.
key.
mode
SLEEP
format to refresh
2-15