Start Date Prompt; What's Next - GE Panametrics GF868 Programming Manual

STARTTIME Prompt
(cont.)

START DATE Prompt

What's Next?

Logging Data
a. Press [F1]-[F2] to select
Hour (1-12) and press
the current time will generate an error message.)
b. Enter the desired Minutes and press
range is 0 to 59.
c. Enter the desired Seconds and press
range is 0 to 59.
11. Press to accept the displayed Start Date or press
[F1]
a different start date. To start logging today, press
•
If or was selected, you have finished setting up the
OK TODAY
error log. Proceed to What's Next? below.
•
Otherwise, complete the following steps to Edit the Start Date.
a. Enter the desired Year and press
0 to 99.
b. Use the [←], [→] and
Month.
c. Enter the desired Day and press
1 to the number of days in the selected month (28, 29, 30 or
31).
You have completed setting up the error log. Do one of the following:
•
Use [↑] and [↓] to review the previous menu prompts.
•
Press to select one of the LOG submenus.
[F1]-[F4]
•
To return to the data screen and begin logging data, press the
[ENT] key. The * on the locator bar indicates that the Model
GF868 is now compiling the specified error log.
The error log will continue to run until it is manually stopped, the
meter runs out of memory (for a non-circular log), or the entire 120
records (2 pages x 60 records/page) have been logged.
AM or PM . Then, enter the desired
. (Entry of a start time earlier than
[ENT]
[ENT] . The acceptable
[ENT] . The acceptable
. The acceptable range is
[ENT]
keys to select the desired
[F1]-[F4]
. The acceptable range is
[ENT]
March 2003
to enter
[F2]
.
[F3]
3-11