GE Panametrics GF868 Programming Manual page 126

Adding the GF868
(cont.)
Programming with PanaView
IMPORTANT: The Network ID number must match the Network ID
programmed in the meter's Communications menu.
If the initialization is successful, the Meter Browser shows a listing
similar to Figure C-5 below.
Figure C-5: The Updated Network Tree
Note: The model number and version that appear will vary with
your particular meter and software version.
However, if the settings do not match, or there is some other
difficulty, a screen appears similar to Figure C-6 below.
Figure C-6: Communication Error Screen
The screen offers the options of trying again or of canceling the
operation. Click on the desired choice, and then on
the choice or on
[Exit Application]
Note: If you cannot resolve the problem, contact the factory for help.
to confirm
[OK]
to close PanaView.
April 2004
C-5