Printing Logs; Numeric Format - GE Panametrics GF868 Programming Manual

Printing Logs

Numeric Format

Printing Data
Use the LOG submenu to print logged measurement data, from a log
file in the meter's memory. The data may be printed in either numeric
or graphical format, with a user specified time increment.
IMPORTANT: Make sure that a printer has been properly set up
before proceeding with this section.
To print logged measurement data, refer to Figure A-5 on page A-5 of
Appendix A, Menu Maps, and complete the following steps:
1. To access the Print Menu, press the
Note: The Print Menu is not protected by the security feature and a
password is never required to access this menu.
2. Press = .
[F2] LOG
3. At the Format prompt, press
format or press [F2] to print the log in graphical format.
4. Use the [←], [→] and
Note: At the
NAME prompt, the option bar shows the names of all
completed or active log files currently stored in memory. If an
active log is selected for printing, only the data already
accumulated at the time of the print command will be printed.
5. Enter the number of the First Page of the log to print and press
. (This prompt does not appear if the log file is only one page
[ENT]
long.)
6. Enter the total number of log pages to print and press
prompt does not appear if the log file is only one page long.)
•
If you chose
[F1] (Numeric)
•
If you chose [F2] (Graphic)
After the numeric format (and starting page and number of pages, if
applicable) is chosen, the Model GF868 returns to the standard data
display screen and begins printing the log file. The printout continues
until the entire log has been printed or until a
issued (see the instructions for the
typical printout is shown in Figure 4-3 below.
LOG TITLE: LOG1
START: 9 SEP 97
END: 9 SEP 97
INTERVAL: 10 seconds
DATE TIME
MM:DD:YY HH:MM:SS
09-09-97 11:50:45
09-09-97 11:50:55
09-09-97 11:51:05
09-09-97 11:51:15
09-09-97 11:51:25
09-09-97 11:51:35
09-09-97 11:51:45
09-09-97 11:51:55
09-09-97 11:52:05
09-09-97 11:52:15
. .
Figure 4-3: A Typical Numeric Printout
key.
[PRNT]
[F1] to print the log in numeric
keys to select a log file to print.
[F1]-[F4]
at step 3, see the section below.
at step 3, go to the next page.
STOP
STOP submenu). A portion of a
11:50:43
11:54:45
ID#1 VOLUM ID#2 +TOTL ID#1 SNDSP
ACF/HR ACF
686.85 218.92 1039.147
666.71 220.83 1039.003
662.28 222.70 1039.511
675.59 224.84 1039.509
669.79 226.71 1039.470
675.99 228.58 1039.137
670.70 230.45 1039.105
684.00 232.57 1039.082
680.58 234.46 1039.255
678.12 236.34 1038.860
. .
March 2003
[ENT] . (This
command is
FT/S
.
4-5