Stopping A Log; What's Next - GE Panametrics GF868 Programming Manual

March 2003

Stopping a Log

What's Next?

3-8
Use the STOP submenu to terminate a logging process that is
currently active. Press the appropriate side of the
activate the desired pane of the display screen, and complete the
following steps:
1. To access the Log Menu, press the
a. If you have activated the security feature (see Chapter 1,
Programming Site Data, page 1-37 for details), enter the
assigned password and press
Note: Once a log is stopped it cannot be restarted, but the log
remains in memory. To clear the log from memory, refer to
Chapter 5, Clearing Data, for instructions.
2. Press [F3] = STOP .
3. Use the [←], [→] and
Note: At the
NAME prompt, the option bar will show the names of
all completed or active log files that are currently stored in
memory. Recall that a flashing asterisk (*) appears at the far
right of the locator bar if the Model GF868 is currently
logging data (see Chapter 3, Operation, of the Startup Guide).
4. Press to continue logging and return to the initial Log Menu
[F1]
screen. Press [F2] to stop logging and return to the initial Log
Menu screen.
Do one of the following:
•
to enter another LOG submenu.
Press -
[F1] [F4]
•
Press [EXIT] to return to the data screen.
[SCREEN]
key.
[LOG]
.
[ENT]
keys to select a log file to stop.
[F1]-[F4]
key to
Logging Data