Start The Instrument And The Computer - GE AKTA avant Operating Instructions Manual

4 Installation
4.2 Hardware installation

4.2.6 Start the instrument and the computer

4.2.6 Start the instrument and the computer
Introduction
This section describes how to start the instrument and the computer.
Instruction
Follow the instructions to start the instrument and the computer.
Step
1
2
80
Action
Switch on the instrument by pressing the Power switch to the I position.
Result: The instrument starts and the Instrument display states Not connect-
ed.
Turn on the computer and monitor according to the manufacturer's instruc-
tions.
ÄKTA avant Operating Instructions 29101556 AB