GE AKTA avant Operating Instructions Manual page 75

Note:
ÄKTA avant Operating Instructions 29101556 AB
If the tubing is too short, replace it with new tubing. Do not lengthen the tubing
as this might cause obstruction of the tubing and flooding in the fraction col-
lector chamber.
CAUTION
Make sure that the waste vessels will hold all the produced volume
of the run. For ÄKTA avant 25, a suitable waste vessel should typi-
cally have a volume of 2 to 10 liters. For ÄKTA avant 150, a waste
vessel should have a volume of 40 liters.
4 Installation
4.2 Hardware installation
4.2.3 Prepare waste tubing
75