GE AKTA avant Operating Instructions Manual page 70

4 Installation
4.2 Hardware installation
4.2.2 Connect the system units
Part
1
2
3
Other connectors are for use by authorized service engineers only.
70
Function
Power input connector
Network connector (Ethernet)
UniNet-9 connectors
Note:
Termination plugs must be connected to the connectors that are not in use.
NOTICE
Misuse of UniNet-9 connectors. The UniNet-9 connectors at the
rear panel should not be mistaken for Firewire connectors. Do not
connect any external equipment to the UniNet-9 connectors. Do
not disconnect or move the UniNet-9 bus cable.
ÄKTA avant Operating Instructions 29101556 AB