GE AKTA avant Operating Instructions Manual page 139

Step
3
ÄKTA avant Operating Instructions 29101556 AB
Action
Register the column using the Barcode Scanner 2-D as follows:
Make sure that the pointer is placed in the first position of the Code box.
•
Point the Barcode Scanner 2-D towards the data matrix tag on the col-
•
umn.
Press and hold the trigger to create a beam.
•
When the scanner beeps, the column ID is registered and displayed in
•
the dialog box.
Alternatively, manually enter the column ID, that you find on the column
•
label, in the dialog box using your keyboard.
Click Continue.
•
Result: The expanded New Column dialog box opens.
6 Run a method
6.3 Start a method run
139