Installation - GE AKTA avant Operating Instructions Manual

4

Installation

About this chapter
This chapter provides the instructions necessary to enable users and service personnel
to install the instrument and the software.
Read the entire Installation chapter before starting to install the ÄKTA avant instrument.
Note:
In this chapter
This chapter contains the following sections:
Section
4.1 Site preparation
4.2 Hardware installation
4.3 Software installation
4.4 Start UNICORN and connect to system
4.5 Prime inlets and purge pump heads
4.6 Performance tests
ÄKTA avant Operating Instructions 29101556 AB
For information on how to how to unpack the ÄKTA avant instrument and how
to lift the instrument onto a laboratory bench see ÄKTA avant Unpacking In-
structions.
4 Installation
See page
52
66
81
82
85
102
51