Start The Instrument - GE AKTA GO Operating Instructions Manual

4.2.4

Start the instrument

Follow the steps below to start the instrument.
Step
1
2
3
ÄKTA go Operating Instructions 29360951 AC
Action
Turn on the instrument by pressing the On/Off button for 2 seconds.
The instrument control panel displays a white light for approximately 2
seconds.
The instrument is on, but is not connected to the UNICORN instrument
server.
Result: The displays toggles between Offline, the instrument IP address, and
the instrument serial number.
4 Installation
4.2 Hardware installation
4.2.4 Start the instrument
51