GE AKTA avant Operating Instructions Manual page 72

4 Installation
4.2 Hardware installation
4.2.2 Connect the system units
Connect to network
Follow the instructions to make network connections.
Step
1
2
72
Action
Connect a network cable between the network connector (Ethernet) on the
back of the instrument and the computer network card dedicated to ÄKTA.
The illustration shows the symbol of the Ethernet connector.
If the computer is to be connected to an external network, connect a network
cable between the main network card of the computer and a network wall
outlet.
Note:
If the computer has not been supplied by GE and if network configuration is
to be used, see UNICORN Administration and Technical Manual for further
information on network settings.
ÄKTA avant Operating Instructions 29101556 AB