Start The System And Software - GE AKTAprocess Operating Instructions Manual

5.1.1

Start the system and software

Start ÄKTAprocess
Step
1
2
3
4
After this sequence is completed, the following occurs:
•
•
Note:
ÄKTAprocess Operating Instructions 29-0252-49 AA
CAUTION
When handling the operator console, make sure that no body parts
are caught between the sections of the console arm.
Action
Make sure that the air supply to the system is turned on.
Turn on the UPS if used.
Make sure that the cabinet doors are closed and locked.
Switch on power to ÄKTAprocess by turning the SYSTEM POWER SWITCH
to the "ON" position. See Section 3.2 Illustrations of ÄKTAprocess, on page 44
for location.
The built-in computer is turned on
The POWER indicator lamp flashes.
When communication with UNICORN software is established, the POWER in-
dicator lamp will show a steady green light.
5 Operation
5.1 Prepare the system
5.1.1 Start the system and software
113