Prime Buffer Inlets And Purge System Pumps - GE AKTA avant Operating Instructions Manual

5.3

Prime buffer inlets and purge system pumps

Introduction
Before you start the system pumps, it is important to do the following:
•
•
For instructions on how to prime the inlets and purge the system pumps, see
Prime inlets and purge pump heads, on page
ÄKTA avant Operating Instructions 29101556 AB
Prime the inlets (fill the buffer inlets with liquid).
Purge the system pumps (remove air from the pump heads).
5 Prepare the system for a run

5.3 Prime buffer inlets and purge system pumps

85.
Section 4.5
111