Oki B820N Setup Instructions page 96

Category
SECURITY JOB
MENU LIMITATION
MAKESECURE-
SDCARD
MAKENORMAL-
SDCARD
RESET CIPHER
KEY
FILE SYS SD INITIALIZE
MAINTE1
※1
PARTITION
SIZE
2 2
SD
FORMATTING
FLASH
INITIALIZE
FILE SYS CHK FILE SYS
MAINTE2
CHK ALL
SECTORS
SD CARD
SD CARD
ERASE
INITIAL LOCK
LANGUAGE LANG
MENU INITIALIZE
Set [FILE SYS MAINTE2] - [INITIAL LOCK] as "NO", and the category of "FILE SYS MAINTE1" shows.
※1
"PS" of the setting value shows on B840dn only.
※2
96
ADMIN MENU
Item Value
OFF
ENCRYPTED JOB
EXECUTE
EXECUTE
EXECUTE
EXECUTE
EXECUTE
PCL/ nnn%/mmm%/
COMMON/ lll%(B840dn)
PS
PCL
COMMON
PS(B840dn) ※2
EXECUTE
EXECUTE
EXECUTE
ENABLE
DISABLE
EXECUTE
YES
NO
EXECUTE
Function / Notes
Job control in restricted mode.
Sets "ENCRYPTED JOB", then printing of all the data other than the
specified print data (only encrypted print can be designated) is restricted.
This item appears only when SD is installed.
Sets the encrypted function of the data in SD to valid.
Generates the password and sets the encrypted function (security
mode) to ON, and initializes SD.
Operate the menu, and then restart the printer.
This item appears only when SD is installed.
Sets the encrypted function of the data in SD to invalid.
Deletes the password and sets the encrypted function (security mode)
to OFF, and initializes SD.
Operate the menu, and then restart the printer.
This item appears only when SD is installed.
Regenerates the password to encrypt SD.
Operates the menu, and then all the data in SD is unrecoverable.
Operate the menu, and then restart the printer.
This item appears only when SD is installed.
Makes SD initialize as factory default.
Operate the menu, and then restart the printer.
This item appears only when SD is installed.
It will transfer to the list screen of SD partition size.
This item appears only when SD is installed.
Sets SD partition size.
Sets the proportion relative to overall SD size by 1%.
Default value for B840dn is 20%(PCL)/ 50%(COMMON)/ 30%(PS), and
20%(PCL)/79%(COMMON)/1%(PS) for B820n.
This item appears only when SD is installed.
Format for the specified partition.
Operates the menu, and then restart the printer.
This item appears only when SD is installed.
Initializes the resident FLASH.
It will solve the mismatch between the actual and the displayed free space of
the file system and recover the management data (FAT information).
Recover result(ErrorReport) is printed when ON-LINE.
This item appears only when SD is installed.
It will recover an error of SD sector information and the mismatch of
the file system noted above.
Recover result(ErrorReport) is printed when ON-LINE.
This item appears only when SD is installed.
Sets access to SD.
Sets to "DISABLE", then SD is regarded as uninstalled. Start the printer.
Operate the menu, and then restart the printer.
This item appears only when SD is installed.
It features of the deletion of all the data stored in the hard disk not to be
recovered them. It aimes at the complete deletion of printing and individual
data left in the hard disk by disposal of the printer and clear disk at return.
This item appears only when SD is installed.
Sets Yes/No of setup change during SD initialization.
If selecting "YES", it will disappear the item of ADMIN MENU" - "FILE SYS
MAINTE1".
"PRINT STATISTICS"-"USAGE REPORT" - "DISABLE"
Initializes the message file loaded in FLASH.
Operates the menu, and then restart the printer.