Table of Contents
Advertisement
The whole area of postcards and envelopes is lightly stained when printed. The periphery of
characters gets stained when rubbed.
Toner may lightly stain (fogging) to
the whole area of postcards and
envelopes.
Toner comes off when rubbed.
The settings of thickness or type of the paper
are incorrect.
Recycled paper is being used.
The lower part of printed pages is faded, or a difference in density between the lower part and the
upper part of the pages is noticeable.
Differences in density of pages printed at a
high density are sometimes noticeable.
When characters are printed using a PS printer driver, the font of them is different from the one
confirmed on a screen.
The file uses a font that doesn't exist in your
system.
This is not a malfunction of the printer.
Set a proper value for [MEDIATYPE] and [MEDIAWEIGHT] in [MEDIA
MENU], or set one value thicker for [MEDIAWEIGHT].
For how to change menu settings, see User Menu.
Set one value thicker for [MEDIAWEIGHT] in [MEDIA MENU]. For how
to change menu settings, see User Menu.
Change the setting of [SMR SETTING] from [MAINTENANCE MENU].
For how to change menu settings, see User Menu.
On your system, install the font used in the file. Or, replace the font
used in the file with another font that exists in your system.
(Page
75)
(Page
75)
(Page
75)
125
Print Quality Problems
4
4
Advertisement
Table of Contents
