Replacing the Toner Cartridge
1
Open the top cover and remove the
toner cartridge.
❶
Rotate the blue release lever in the
direction of the arrow until it stops.
❷
Hold the toner release lever by one end
to lean to raise the toner cartridge.
❸
Tilt up the toner cartridge and pull it out
horizontally.
3
[Position of the toner cartridge release lever]
Location to remove the toner cartridge Toner cartridge installed
• Install the image drum tube to the opposite side
Note!
to the toner cartridge release lever. Lift or pull out
the image drum tube can cause damage to it.
• When disposing of used toner cartridges by
necessity, poly-bag them, and be sure to
follow instructions and regulations of your local
government.
102
Replacing the Toner Cartridge
Release Lever
Be sure not to throw used toner
cartridges into fire; toner in the
cartridges flies and explodes and
burn injury may result.
2
Install a new toner cartridge.
❶
Unpack the new toner cartridge.
❷
Hold the toner cartridge at both ends to
gently shake it for several times.
❸
Place the toner cartridge horizontally and
slightly remove the tape from it.
❹
Install the toner cartridge hole to the
bulge section (post) of image drum with
tape face down.
❺
Firmly press the grooves at the right side
of the toner cartridge against the bulge
section of toner cartridge guide rail.
❻
Rotate the toner cartridge release lever
in the direction of the arrow until it stops.
Toner Cartridge
Pole
Hole
Image Drum
When the toner cartridge is not fully fixed, a
Note!
decline in print quality may occur.
Toner Cartridge
Tape
Grooves
Release Lever
Lock