Oki B820N Setup Instructions page 63

❸
Place paper on the tray and adjust the
manual guide to the paper width.
Note! Note that paper does not exceed the " "
mark indicated on the manual guide.
" " Mark
Manual Guide
❹
Press the Set button
Manual feeding print is available from the
Memo
multi-purpose tray.
For manual feeding print, load the paper on
the printer after printing from the computer,
and check sheet by sheet, and then press the
ON LINE button to start printing.
Place the paper with the
printed side up, and insert
the paper until it stops.
Then, press the Set button.
Orientation of Setting Paper
Postcard Double postcard
When there are top and bottom on paper
ABC
A4 (Portrait feeding), B5, Letter
Note!
Paper Supporter
Set Button
Com-9, Com-10, DL,
C4, C5, C6, Monarch
• Use paper kept in an appropriate temperature and
humidity. Do not use curling or waving paper caused
by humidity. (Creases may occur on the paper.)
• Adjust paper guide and stopper so that space can not
be left between paper and paper guide and stopper.
Furthermore, do not push so hard that paper is
curved.
• Set papers not to be over "
guide. You can load paper with 80g/m
70kg), and load 530 sheets from Tray1, Tray2 (optional),
and Tray3 (optional), and 100 sheets in the multi-
purpose tray.
• Do not set papers having different size, type and
weight at the same time.
• When you add paper, take paper in a tray out and set
it into alignment with added paper.
• Insert a cassette softly when the cassette is inserted
in the printer.
• Do not pull out the tray during printing. When printing
from Tray 2 (option) and Tray 3 (option), do not take
out the paper cassettes of Tray 1 and Tray 2 (option).
• A paper cassette cannot be used for postcards and
envelopes.
• Warping envelopes and postcards cause feed trouble.
Please use them without warping. Warping has to be
within 2mm.
• Set envelopes to be portrait.
• Warping at the flap of the envelope may cause paper
feed trouble. Flatten it out before using.
• Do not place anything other than paper for printing on
the MP tray, push from above or exert excessive force.
• Fold and store the multi-purpose tray when it is not
used.
• When the paper wrap indicates print side or face side,
load the side into the printer face down. If unmarked,
load the unpacked side into the printer with the side
up.
" mark of the paper
2
(ream weight
63
Printing
2 2